Osborn – Primary/Heavy Cut Airway Buffs

C$21.50C$27.99

Buffing wheels designed and constructed for cut-down operations on metal.

To achieve a beautiful mirror finish, metal (like any material) needs to be prepared by cutting down the surface to remove highs and lows. Deep scratches diffuse light and reduce your clarity; cut them out with a coarse cutting compounds and firm buffing wheels that enhance the cut-down effect! Spectrum recommends combining these buffs with Menzerna’s 439T, 456G, or 113GZ Heavy Cut compounds.

Please note: Matchless was recently purchased by Osborn (Jackson Lea). Osborn has not yet been able to fully commission Matchless’ original buff production machinery; as a result, Osborn has continued supplying airways produced with Matchless’ cloth but manufactured on their own buffing wheel production equipment. As a result, buff appearance may vary from those pictured – this is, however, a temporary solution as they work to start up Matchless’ equipment and bring all their equipment to the same specifications.

Purchase any 10+ buffs and save 5%! Purchase any 20+ buffs and save 10%!
Clear

Pair best with: Menzerna 523LBZ, Menzerna 439T, Menzerna 456G, Menzerna 113GZ, Menzerna 333, Menzerna P14F

Buff will need to be raked prior to initial use. Does not include a center reducer plate. Requires the use of a self-centering safety flange set or standard end flanges (ideally) in conjunction with a center reducer plate for proper mounting and safe operation. Industrial grade.

Max RPM:
10" x 3" = 3200 RPM
12" x 5" = 3000 RPM

WeightN/A
DimensionsN/A
Wheel Diameter

10" x 3", 12" x 5"

Color/Hardness

Violet (Extra Hard Double Mill Treat), Lavender (Extra Hard), Orange (Hard), Blue (Medium-Hard)

Construction

60/60 Cloth (Heavy, Dense), #4 Pack (Heavy Duty), 16 Ply, 86/80 Cloth (Extra Dense), #2 Pack (Standard Duty), 20 Ply, 86/80 Cloth (Extra Dense), #4 Pack (Heavy Duty), 16 Ply

  1. Ryan l Dean (verified owner)

    Matchless (Osborn) Lavender Airway: Amazing cutting wheel for heavy first cuts, this is my go to when I need something that’s less aggressive than a sisal for stainless or heavy cutting on aluminum when I don’t sand.

    Was this review helpful to you?
    Yes
    No
  2. Gabriel Toste (verified owner)

    Was this review helpful to you?
    Yes
    No
  3. Jordan Classen (verified owner)

    Was this review helpful to you?
    Yes
    No
  4. Gregory Ellis (verified owner)

    Was this review helpful to you?
    Yes
    No
  5. ALAN FLYNN (verified owner)

    i got the blue, nothing special

    Was this review helpful to you?
    Yes
    No
  6. Marty R. (verified owner)

    Was this review helpful to you?
    Yes
    No
  7. Joe Walsh (verified owner)

    Was this review helpful to you?
    Yes
    No
  8. Justin T. (verified owner)

    Was this review helpful to you?
    Yes
    No
  9. Joe Walsh (verified owner)

    Was this review helpful to you?
    Yes
    No
Add a review

Your email address will not be published. Required fields are marked *