Menzerna – 480BLF Aluminum Finish
C$18.49
Produces a high gloss and fine mirror finish on aluminum.
Menzerna 480BLF is a finishing compound developed especially for aluminum surfaces; it’s also suitable for brass and other non-ferrous metals. Spectrum recommends pairing this compound with soft buffs like our Osborn yellow and untreated white airways. You may find this compound less suited to flannel as it’s dry, dense, and needs higher buffing wheel speeds/heat for best results (e.g., no less than 2600RPM suggested).
Cut / Gloss: 2 / 8
In stock
480BLF is recommended by Menzerna as the final stage in a two-step polishing process for aluminum; start with Menzerna 439T and finish with 480BLF. Additional polishing steps can add more clarity.
Complements: Menzerna 439T, Menzerna P14F, Menzerna P175
Pairs with: Osborn Clear Treat Airway, Osborn Untreated (White) Airway, Osborn Flannel Airway
Storage: Store between 5C and 30C, avoid frost/freezing and direct sunlight.
Menzerna suggested process for: aluminum.
Precautions: Do not breathe dust during use. Wear appropriate safety clothing and respiratory protection. Generated dust exposure can irritate eyes and skin.
Weight | 1.242 kg |
---|---|
Dimensions | 23 × 6.5 × 4.5 cm |
ryan l dean –
Amazing coloring bar! Load it into the bad a bit more than the cutting bars but still a little goes a long way!
Gabriel Toste (verified owner) –
Jordan Classen (verified owner) –
The best.
Davey Jurist (verified owner) –
Great bar
Gregory Ellis (verified owner) –
Great for a fast 2 step finisher. Long lasting too.
Dustin Fisher (verified owner) –
Anonymous (verified owner) –
Marty R. (verified owner) –
Joe Walsh (verified owner) –
Guy Lommi (verified owner) –
David (verified owner) –
.